Hi — I’m looking to commission a single paid test asset before moving forward with a larger 1:35 scale diorama asset project. Test Asset: Construction wheelbarrow (real-world accurate, slightly used condition — subtle wear, not exaggerated damage) Technical Requirements (must be followed exactly): - Scale: 1:35, modelled in millimetres (real-world scale) - Format: STL (primary deliverable) - Geometry: fully watertight, manifold, no open edges or internal artifacts - Detail: high geometric detail (no reliance on textures or maps) - Print readiness: suitable for resin printing - Wall thickness: minimum 0.6–1.0 mm where applicable - Fine detail depth: minimum 0.2–0.3 mm - Clean topology (no messy booleans or scan artefacts) Deliverables: - Clean, unsupported STL - (Optional) supported version as a separate file - Source file (preferred, if available) Important: - This must be original work only (no kitbashing, no AI-generated meshes, no reused assets) - Asset must be dimensionally accurate to a real wheelbarrow - Designed specifically for physical printing, not game use License (required): - Full commercial rights - Ability to use in printed products and bundled kits - Permission to modify and adapt for production use Focus on accurate construction and print-ready geometry, not just visual appearance. If the test asset meets standard, this could lead to a larger multi-asset contract (20–30 assets). Please confirm: 1. You can meet all technical requirements 2. Estimated cost for this test asset 3. Turnaround time 4. Examples of similar high-detail work (if available) I’m prioritising precision and print quality over speed. Thanks.