I have a newly built 150 m² residence that needs a complete lighting and electrical layout. The heart of the home is an open-plan living–kitchen zone with a sloped roof; a 10 m long, 3 cm wide linear slot diffuser will run through this space and must visually line up with every lighting element and gypsum-board joint. My goal is a crisp, minimal-modern look, so symmetry and exact alignment are non-negotiable. Lighting concept The scheme should mix recessed downlights, a continuous concealed LED strip, and a few statement pendants while allowing for dimming control in key areas. Please weave the fixtures seamlessly around the diffuser and any false-ceiling steps so no trim or junction distracts from the clean lines. Scope of work • Reflected ceiling plan (RCP) showing all fixtures, circuits, and switching with dimmer locations • Detailed electrical drawings for the on-site electrician, including load schedules and cable routes • Gypsum-board/false-ceiling drawings highlighting cut-outs, recesses, and support details for concealed lighting • Coordination notes to keep diffuser, lights, and ceiling geometry perfectly aligned Resources I’ll supply – Current floor plan in PDF – Base DWG file – Initial 3D visualization for context and desired ambience Delivery expectations Editable AutoCAD (or compatible) files plus print-ready PDFs. Drawings must be ready for construction with dimensions, levels, and clear legends. You should include lighting scenarios (dimming zones and suggested use cases) for the main open-plan area. The project should include at least 2-3 review rounds. The final design should only be considered complete after approval following these review stages. If you have solid residential experience and an eye for precision, I’m ready to share the files and move forward. Please share examples of similar completed projects (RCP+lighting desing) with your proposal.