You must develop a full architectural and technical drawing package for a modular hunting cabin with an A-frame roof. The cabin is built from modules, each: • Width: 4 m • Length: 1.2 m Types of modules: 1. Start module (door + window) 2. Intermediate modules 3. Final module (one window) Total cabin size: • Length: 6 m • Width: 4 m • Height: ~4 m (A-frame peak) • Front terrace: width 4 m, depth 1 m The cabin does not need to comply with Norwegian building codes — but drawings must be professional. 2. Construction and Materials Framing • Structural timber: 45×145 mm • Walls and roof: same frame thickness • Base frame: impregnated wood Sheathing • Exterior: 15 mm OSB • Interior walls: wooden paneling Insulation • 150 mm mineral wool insulation • External wind barrier membrane (Tyvek-type) Roof Two options (both must be supported): 1. Metal roof 2. Bitumen felt roof Windows & Doors • Standard EU sizes • Start module: door + window • Intermediate: pass-through sections • Final module: one window 3. Required Deliverables 3.1. Full technical drawings • Floor plans • Elevations • Sections • Detail drawings • Module diagrams • Assembly diagrams • Minimum 3 visualizations (front, side, interior) 3.2. Detailed connection node design Freelancer must independently design: ❗ All inter-module connection systems: • structural joints • roof-to-wall connections • horizontal/vertical module joints • OSB sheathing connections • bracing systems • A-frame rigidity components • roof nodes for both roofing types All nodes must be provided with dimensions. 3.3. Assembly package • step-by-step assembly diagram • bill of materials (BOM) • fastener list • timber profile list • 3D master model 4. Submission Format • PDF (drawings) • DWG / DXF (mandatory) • JPG / PNG (visuals) • 3D model (SKP / FBX / OBJ)