Hello dear freelancer, I hope you are having a great time. Kindly read the job description and make sure you can work on this project with in the budget we have for it, then you are more than welcome to accept it or reject it. Please ask your questions if you have any, prior to accepting it, I will be more than happy to explain more if needed. I have a school project with a very little budget, which is a 3D Water Jet Car model (460 cm length), the top part and the bottom separately need to be cut into cross-sections for a section modeling process. The model should be divided every 10 cm from front to rear, resulting in approximately 45–46 sections. Each section must be exported as a separate DXF file, ready for CNC cutting (plywood). Files must be clean, properly scaled (1:1), and accurate for manufacturing. Dedicated budget for this phase is $50, but there will be a second project with more budget when we succeed in this part which is building a 3D model based on multi views images. Experience with 3D modeling software (AutoCAD, Fusion 360, SolidWorks, Rhino, etc.) Note: the attached file is for the illustration and there are some free models on GrabCad website to use. Kind regards, Dana