I have a SolidWorks assembly for an air-shock support that currently accepts two shock sizes (8.5 × 217 mm and 7.5 × 190 mm). I now want the design to work with only the 7.5 × 190 mm unit, which calls for relocating both the lower and upper shock mounts and ensuring the structure still survives a 150 kg load test. Your task is to examine the model, identify every weak point, and propose modifications that will increase load capacity, optimise the shock-absorber position, and improve overall stability. The focus is on both shocks, with geometry and alignment receiving extra scrutiny. Deliverables • Review report: annotated screenshots and clear explanations of each weakness you find. • Modification plan: stress or FEA evidence supporting your recommendations. • Updated files: SolidWorks 2020-compatible parts/assembly plus neutral STEP or IGES reflecting the new single-size shock layout. • Change log summarising what you altered and why. Acceptance I will sign off when the revised model, running a 150 kg simulation, shows an adequate safety factor and the new shock positions align perfectly with the 7.5 × 190 mm spec.